Finished 1.61 ASP UV400 HMC 65/70MM Prescrition Eyeglass Lenses For
High Power
I. Specifications:
| Production | 1.61 ASP UV400 HMC |
| Monomer | imported from Korea |
| Diameter | 65/70mm |
| Abbe value | 33 |
| Specific Gravity | 1.34 |
| Transmission | >97% |
| Guarantee years | 5 years |
| Power range | SPH: 0.00~+-20.00 CYL: 0.00~-6.00 |
| Samples | Samples are available, and according to our company rule, our
customers need to assume the shipping cost. |
| Payment | 30% advence by T/T, the balance before shipment |
II. Features:
Aspheric Spehric
Aspheric's edge is not distortion, distortion is small, also offer
you the clear vision.
------Lighter weight and thinner thickness, up to 50% thinner and 35% lighter
than other lenses.
------Higher resistance to scratches and impact.
------Fuller protection against UV rays.
------Easier to clean due to the water and dirt repellent surface.
Amazing visual comfort and aesthetic appeal.
III. Coating Choices:
Depending on the layers of coating, lenses differ in functionality.
Coating consists of much technicality as much as lenses do, here is
'how lens coating works' for your reference.
Hard Coating: To make the uncoated lenses are easily subjected and exposed to
scratches. Make your vision be more protected.
AR Coating/Hard Multi Coating: To protect the lens effectively from reflection, enhance
functional and charity of your vision.
.
Super Hydrophobic Coating: To make the lens waterproof, antistatic, anti slip and oil
resistance.
IV. Technical Data:
V. Producing process:
VI. Packing&Shipping:
| Envelop |
| Choice 1 | Choice 2 |
| White envelop | color envelop with customer design weight: 157g size: 9*9*9cm |
| Outer box |
standard export paper carton 38cm*48cm*35cm(0.064 CBMS) |
| Finished lens | Semi-finished lens |
about 500 pairsper carton, 21kgs | about 100 pairs per carton, 15kgs |
| Lead time |
| Depend on the quantity |
| Carrier |
| We can choose for you or offer us your cooperative company |
| All the numbers provided above are estimated number,the actual
numbers need to be measured according to the order you make |
VII. FAQ:
1. Are your company a manufacturer or a trade company?
We are a manufacturer with many years exporting experience. Our
factory is located in Jiangsu province.
2. How can I get sample from you?
Just send us your requirements, then we will send samples
accordingly.
3. Can your products be customized?
We accept OEM &ODM orders. Actually most of our products are
customized. We will try our best to fulfill your requirements about
the material, the size, the printing.
4. How many days will samples be finished? How about mass products?
Generally, we need 5-7 days to finish the sample production.
As for the mass products, it depends on your order quantity.
5. Do you have stock products to sell?
Yes.We have a lot of inventory.
